SolidCAM G-Code Simulator 9.5

SolidCAM G‑Code Simulator is a verification and visualization tool that helps CNC programmers and machinists validate post‑processed NC code before it reaches the machine. Load your G‑code, preview toolpaths in 2D/3D, and watch material removal against accurate stock, fixture, and workholding models. The simulator accounts for machine kinematics (3‑ to 5‑axis, mill‑turn, and lathe), interprets common subprograms and canned cycles, and flags potential issues such as collisions, gouges, over‑travel, and axis limits. Step through code line by line, set breakpoints, adjust playback speed, and review cycle‑time estimates to optimize your programs. You can also compare the simulated part to the nominal CAD model to visualize deviations and confirm tolerances. By catching problems early, SolidCAM G‑Code Simulator shortens prove‑out, reduces scrap, and increases shop‑floor confidence.

Key capabilities:

• Verify post‑processed G‑code, not just internal toolpaths
• 2D/3D toolpath backplot and material‑removal preview
• Machine‑aware simulation for multi‑axis milling, turning, and mill‑turn
• Detection of collisions, gouges, over‑travel, and limit violations
• Support for common subprograms, canned cycles, and controller syntax
• Step, single‑block, and breakpoint debugging with cycle‑time estimates
• CAD‑to‑part comparison with deviation visualization
• Report and setup documentation generation for handoff to the shop floor

SolidCAM G-Code Simulator is developed by Roboris srl. The most popular version of this product among our users is 9.5.